 |
West
Yard House
Guildford Grove, Greenwich
London SE10 8JT, UK
Tel: +44 (0)20 8692 5050
Fax: + 44 (0) 20 8 692 5155
Email: intercomm@dial.pipex.com |
|
|
|
|
|
|
|
|
| |
|
|
Interflam 2001
Proceedings of the 9th conference
Page
2 of 6
|
2
Volumes |
Publication Date:
Sept 2001
The ninth international conference was
held in Edinburgh, Scotland 17th –19th September. The
proceedings contain 94 technical presentations and keynote
papers and 58 poster papers. Volume 1 contains
the following papers: Keynotes
, Fire
Chemistry | Risk Assessment
| Codes | Fire
Resistance | Fire
Behaviour of Materials | Detection
& Suppression | Standards
| Testing | Fire Dynamics
| Modelling Large Fires
| CFD Modelling | Volume
2 contains:| People
in Fires |
Transportation Fires
| Fire Investigation
| Modelling
| 58 Poster Papers (listed
by session)| Author Index
Details:
Hardback, 1570pp with 269 tables and 772 illustrations, ISBN
0 9532312 7 5 (set)
REDUCED
PRICE from July 2004 (was £110)
Price:
£ 75 plus p+p at following rates: UK - £7.50,
Europe - £13.50, Rest of World - £22 |
TABLE
OF CONTENTS |
|
FIRE
BEHAVIOUR OF MATERIALS
Ignition of wood - A review of the state of the art, Vytenis
Babrauskas, Fire Science & Technology Inc, USA
Durability of FRT wood at exterior and humid applications -
initial studies, Birgit Östman, L Tsantaridis, Tratek,
Sweden
Wooden disk combustion for spot fire spread, John Woycheese,
Worcester Polytechnic Institute, USA
Prediction of smoke production based on statistical analyses
and mathematical modelling, Anne Steen Hansen,
P-J Hovde, Norwegian Univ of Science & Technology, Norway
Characterizing the thermal environment of the cone calorimeter
for analyzing ignition data of materials
Marc Janssens, Univ of North Carolina, S Dillon, Bureau
of Alcohol, Tobacco and Fire Arms , S Allwein, Southwest Research
Institute, USA
Can the cone calorimeter be used to predict full scale heat
and smoke release cable tray results from a full scale test
protocol? Marcelo Hirschler, GBH International, USA
The effect of the melt-flow process on the fire behaviour of
thermoplastics, Jo Sherratt, D Drysdale, Univ of Edinburgh,
UK
Fire research and testing for new nitrate film storage facility,
Martin Shipp, C Williams, N Marshall, FRS/BRE, UK
Fire performance of IT equipment studied in the furniture calorimeter,
Donald Bliss, National Assc of Fire State Marshalls, USA; M
Simonson, SP, Sweden |
DETECTION
& SUPPRESSION
Development of a re-entry evaluation detector, Linda
Knutsen, A Chapman, QinetiQ Ltd, UK
Extinction of fires by direct dumping of liquid nitrogen,
Yiannis Levendis, College of Engineering at Northeastern Univ,
USA, M Delichatsios, CSIRO, Australia, H-Z Yu, H-C Kung, Factory
Mutual Research, USA.
Modelling of foam spread on a burning liquid, Anders Lönnermark,
H Persson, B Persson, SP, Sweden
Experimental study of fire ventilation procedures in a
large hall, Stefan Svensson, Swedish Rescue Services Agency,
P Werling, Swedish Defense Research Establishment, Sweden
Protection for nonstorage occupancies with high ceiling
clearances,
Soonil Nam, A Braga, H-C Kung, J Troup, Factory Mutual Research,
USA
|
STANDARDS
The
SBI test method - development decisions and recommendations
for use, Rudolf van Mierlo, TNO Building and Construction
Research, Netherlands, B Sette, Univ of Ghent, Belgium
Development of a common European system for fire testing and
classification of pipe insulation, Jesper Axelsson, B
Sundström, SP, Sweden, U Rohr, Convenor CEN/TC88/WG10,
Germany
The need for full scale testing of sandwich panels - Comparison
of full scale tests and intermediate scale tests, Patrick
Van Hees, P Johansson, SP, Sweden
|
CONTINUED
>>GO TO PAGE 3 |
| |
|
| copyright
Interscience Communications Ltd © 2003-2008 |
|
